- Piece/Pieces
- 1
- Piece/Pieces,
- 3500000.00 - 4000000.00 INR
- Motor Grader
- Road Work
- Other
- Motor Grader
- Wheel Loader
- 8 Ton/day
- 34.0 to 38.0 Km/hr
- 306 Nm 1300-1700 rpm N-cm
- 7740 Kilograms (kg)
- No
- No
- Yes
- Manual
- 85 Liter (L)
- 50 litres @ 2000 hrs Liter (L)
- 528 mm Millimeter (mm)
- 7835, 2667, 3290 Millimeter (mm)
- Yellow
Mahindra G75 Road Master Motor Grader is a diesel powered turbo charged constructional grade self propelled machine that is designed for the construction of roads and highways. It is mounted with a secured drivers cabin with various control elements that makes it easier for the operator controls this machine. The offered Mahindra G75 Road Master Motor Grader is in high demand due to its capability to move materials with a capacity of 8 tons per day.
Specification :
|
|
Model | Mahindra DITEC 4805 IA BSIII CEV |
Form of Air Aspiration | Turbo Charged |
No of Cylinders | 4 |
Bore | 96mm |
Stroke | 122 mm |
Displacement | 3532cc |
High idle rpm | 2500 rpm |
Low ideal rpm | 850 rpm |
Cooling system | water cooled |
Type of fuel | Diesel |
Gross horse power | 58.8 kW (79.95 HP) 2300 rpm |
Peak gross torque | 306 Nm 1300-1700 rpm |
Electrical system voltage | 12 V |
Gross vehicle weight | 7740 kg |
|
FAW | 2060 kg |
|
RAW | 5680 kg |
|
Speed gear (kmph) | Forward | Reverse |
1st | 4.5 to 6 | 6.0 to 7.5 |
2nd | 7.5 to 9.0 | 9.0 to 10.5 |
3rd | 17.5 to 19.5 |
|
4th | 34.0 to 38.0 |
|
Turning radius outside tyre R1 | 10 m |
|
Steering angle inner wheel | 45 degrees |
|
Steering angle outer wheel | 32 degrees |
|
Base Length of MB |
| 2600 mm |
Thickness of Moldboard |
| 16 mm |
Blade Height | H19 | 516 mm |
Standard Length of Cutting Edge | WB | 2600 mm 3 piece cutting edge 1100 + 1100 + 400 |
Standard length of cutting edge with side extension | WB | 3000 mm 4 piece cutting edge 1100 + 1100 + 400+ 400 |
Width of Cutting Edge | 152 mm |
|
Thickness of Cutting Edge | 16 mm |
|
Width | C | 200 mm |
Thickness | | 16 mm |
Blade Pull force (Kgs ) | | 3500 max |
Blade Down force (Kgs) | | 3500 max |
Distance between mid and rear axle | L9 | 1850 mm |
Distance between front and middle axle | A | 4300 mm |
Wheel Base | L3 | 5225 mm |
Distance- Front axle to Moldboard Blade base | L12 | 1691 mm |
Transport length | L1 | 7835 mm |
Ground Clearance below front axle beam | H18 | 528 mm |
Minimum Ground Clearance | H4 | 467 mm |
Max vehicle height | H1 | 3290 mm |
Track width- Front | W3F | 1674 mm |
Track Width Rear | W3R | 1654 mm |
Width- outside front tires | W1F | 2021 mm |
Width- outside rear tires | W1R | 2001 mm |
Width Transport (Without blade extensions) | WW7 | 2327 mm |
Width Transport (With blade extensions) | WW7 | 2667 mm |
Distance outside front tyre and blade(Without blade extensions) | B | 153 mm |
Distance outside front tyre and blade (With blade extensions) | B | 323 mm |
Circle rotation angle | AB | 30 deg from transverse of vehicle |
Circle drive | Hydraulic cylinders with no end mechanical stoppers | |
Blade side shift (LH/ RH) | W15 | 513 mm |
Blade tilt angle/ Bank cut angle (LH/RH) at ground level measured on blade | A9 | 20 / 15 |
Blade tilt angle/ Bank cut angle (LH/RH) at ground level measured on drawbar | A9 | 25.6 / 20 |
Blade pitch angle at ground line | A11 | Forward 40, Backward 15 |
Blade without extension outside front tyre with blade positioned parallel to wheel axis | W9 | 289.5mm |
Blade outside front tyre with blade positioned parallel to wheel axis | W9 | 489.5mm |
Blade lift at normal blade pitch angle | H20 | 400 mm |
Max blade cut depth below ground at nominal blade angle | D | 300 mm |
Attachment oscillation angle | E | Upward 15 deg, Downward 15 deg |
Model Name | Carraro 4WDTransmission |
Gear Ratios | Forward / Reverse |
1st | 5.603 / 4.643 |
2nd | 3.481 / 2.884 |
3rd | 1.585 / 1.313 |
4th | 0.793 / 0.657 |
Torque converter ratio | 2.64 |
Type | None Driven, Steerable Central Pivoted |
Loading Capacity(TON) | 8 |
Type | Driven, Non Steerable, Rigid |
Reduction ratio, Differential | 2.75 |
Reduction Wheel end | 6.932 |
Total Reduction Ratio | 19.04 |
Type | Driven, Non Steerable, Central Pivoted |
Reduction ratio, Differential | 2.75 |
Reduction Wheel end | 6.932 |
Total Reduction Ratio | 19.04 |
Tyre Spec | 13 x 24-12 PR |
SLR | 600 |
DLR | 603 |
Wheel Rim Size | 9x24 |
Front / Middle / Rear | 44 psi |
Service Brake type | Foot operated hydraulically actuated oil immersed disc in middle axle |
Parking brake type | Hand operated, mechanically, actuated oil immersed disc in middle axle |
Type | Power Steering |
steering Valve | Load sensing with priority valve 200 cc |
Other feature | Emergency steering in case of pump failure |
System Voltage | 12 V |
Battery Rating | 12 V, 100 AH |
Alternator type | 12 V, 90Amp |
System | Open Centre |
Pump Type | Fixed Displacement Tandem Gear Pump 21 cc + 21 cc |
Max Pump Flow rate | 46 litres 2300 rpm |
Max Working pressure | 180 bar |
Refill qty | 50 litres |
System Capacity | 60 litres |
Other Feature | Load Holding with pressure refill valves for lift and sensing cylinder |
Hydraulic tank | 50 litres 2000 hrs |
Fuel tank | 85 litres |
Engine coolant | 17 litres 1000 hrs |
Engine oil | 13.5 litres 500 hrs |
Transmission | 16 litres 1000 hrs |
Middle axle or Rear axle (Differential) | 14.5 Litres 1500 hrs for each axle |
Middle Axle or Rear Axle (Final Drive) | 1.5 litres (On each wheel end) 1500 hrs |
Ripper | 5 tyne |
Dozer | 1.98 meter Width |
- 1 Per Month
- 15 Days
Plot No.- A/1, Chakan Industrial Area, Phase VI Post, Nighoje, Chakan, Tal Khed,, Pune, Maharashtra, 410501, India
Phone :08045476823